Parametric screw editor

A screw. Made your way.

Start with a preset. Refine the head, shaft, thread and optional nut. Inspect your design in 3D and export STL.

Open editorExplore the controls
3Ddesign inspection
mmyour dimensions
STLmodel export
From head to thread

Refine the parts that matter.

A preset is a starting point. Refine each component in its own section.

01

Presets and dimensions

Choose a screw type and set length and diameter. Check your design dimensions before export.

02

Head and drive

Choose an available head and drive type, then adjust their dimensions.

03

Thread pitch

Choose an available coarse or fine series, or custom settings. Pitch is the distance between adjacent thread turns.

04

Thread coverage

Use a full thread or leave part of the shaft unthreaded.

05

Screw and nut

Add a matching nut and adjust its dimensions and clearance. Inspect the parts together or separated.

From idea to STL.

  1. 01Choose a starting point
  2. 02Adjust and inspect
  3. 03Export STL

Start with one screw.

Check dimensions and suitability with a test print.

Open editor